What Does 1+2+400 Mean on a Split Starlight Headliner Kit?
Share
On the current VASTFIRE split kit, 1+2+400 means one main controller, two light heads and 400 fiber strands. Each strand is listed as 0.5 mm in diameter and 1.5 m long. The code describes the supplied components, not a finished headliner panel, a guaranteed roof area or a count of stars already installed. Read the complete configuration before comparing prices.
That explanation applies to this listing. Other suppliers may arrange their codes differently, so an unfamiliar string of numbers should be checked against its own configuration table.
Read the option from left to right
The first number is the main controller quantity. It stays at one across the four configurations currently offered. The second number tells you how many separate light heads are included. The next number is the fiber quantity.
In 1+4+800*0.5*1.5m, for example, the order is one controller, four light heads, 800 fibers, 0.5 mm diameter and 1.5 m length. The four is not the number of independent app-controlled color zones, and the 800 is not a measurement of the roof area the kit will cover.
The split kit product page currently lists these options:
- 1+2+400*0.5*1.5m: one controller, two heads and 400 fibers, at $59.
- 1+2+600*0.5*1.5m: one controller, two heads and 600 fibers, at $69.
- 1+4+800*0.5*1.5m: one controller, four heads and 800 fibers, at $79.
- 1+6+1800*0.5*1.5m: one controller, six heads and 1,800 fibers, at $109.
These are the USD product prices checked for this article. Installation work is separate, and the product page remains the place to check the current offer.
More fibers do not change every other measurement
All four options listed above use the same stated diameter and length. Moving from 400 to 600 adds strands while keeping two light heads. Moving to 800 also changes the head quantity. The largest configuration includes six heads, so it changes the hardware layout as well as the strand count.
None of those increases turns a 1.5 m strand into a longer strand. Before choosing a configuration, your installer needs a proposed star layout and the actual routes from the light heads to those points. A total strand count alone cannot confirm reach or fitment.
Keep the selected code with the order
Save the complete option name, not just a note saying “the bigger one.” Give the installer that code together with the product link and your vehicle details. It is much easier to compare a delivery against a specific configuration than a general ceiling photo.
The gallery contains representative hardware and effect images as well as a labeled 600-fiber example. Those pictures help explain the system; the selected option and configuration table identify the quantities being ordered. If a label in a picture differs from the option you want, check the code before paying rather than treating every gallery image as the contents of every box.