Ambient Lights Reset After Restarting the Car? Check What Is Being Remembered
Share
The lights look right when you park. On the next start, they return to a different color. That does not tell you, by itself, whether the controller is faulty.
“Memory” can mean several things: remembering a color, remembering brightness, remembering a mode, or remembering whether the lights were off. Find out which behavior your particular system promises before changing its power connection.
Make a small record of one normal trip
While parked, choose a steady color and a brightness you can recognize. Note the mode and whether every lighting group is on. Then switch the car off and leave it as you normally would.
On the next normal use, observe the lighting before opening the app. Does it come on immediately? Is the color different, the brightness different, or the entire effect different? Does opening the app change it again?
Those details separate the controller's startup state from a setting applied when a phone reconnects. They do not establish an electrical cause. Avoid repeatedly starting the vehicle solely for the test.
Ask for the exact memory function
Check the instructions for your controller model. A listing that mentions an app, presets or Bluetooth does not necessarily promise that every setting survives a loss of power. Likewise, a saved favorite in an app is not proof that the controller starts in that favorite.
The current VASTFIRE RGB ambient kit page lists app and physical control, effects and configuration-dependent two-zone control. It does not confirm which settings are retained across shutdown. Contact us for the current controller's behavior before making startup memory a buying requirement.
Useful questions are specific: Does it retain the last steady color? Does each zone retain brightness separately? What happens after a normal vehicle shutdown, and what happens after complete power removal? Ask about the supplied hardware version rather than relying on a video of a similar-looking unit.
Keep the wiring decision with the installer
Do not move the supply to a permanently live circuit to preserve a color. That changes the installation's electrical behavior and may introduce other problems without providing the memory function you wanted.
Tell the installer when the lighting switches off relative to the vehicle and whether it ever remains on unexpectedly. Let them compare the installed supply arrangement with the vehicle service information and kit instructions. The separate parking-power guide explains why the supply arrangement deserves its own assessment.
Use a description that can be repeated
A short support message could say: “Steady blue before shutdown; red at the next normal start; blue returns after the app opens.” Replace that example with what you actually observed. Include the kit version and note any recent controller or phone change.
Until the behavior is confirmed, adjust settings only while parked. If one preset has to be selected manually at each start, you can decide whether that suits you. It is better to know that limitation than to pay for an unplanned wiring change in pursuit of a feature the controller never promised.