AI-generated editorial illustration of five cabin lighting concept cards being compared on a workshop table

6in1 to 22in1 Car Ambient Lighting Kits: Which Should You Choose?

Choose the kit for the locations you want lit

Choose 6in1 for the six dashboard and door-trim strips; 10in1 adds footwells; 14in1 adds handles; 18in1 adds pockets; and 22in1 adds speaker surrounds. These are cumulative lighting-piece counts. Speakers are not supplied, and two-zone control is listed only for 10in1–22in1.

What each VASTFIRE kit includes

VASTFIRE kit contents and prices, checked October 29, 2026
Kit Included lighting pieces Price (USD)
6in1 6 dashboard and door-trim strips $59
10in1 6 strips + 4 footwell lights $69
14in1 6 strips + 4 footwell + 4 door-handle lights $79
18in1 6 strips + 4 footwell + 4 handle + 4 door-pocket lights $89
22in1 6 strips + 4 footwell + 4 handle + 4 pocket + 4 speaker-surround lights $99

Prices are the listed hardware prices in USD, checked on October 29, 2026; installation labor is separate. Check the current product page before ordering. The component layout for your selected version is a better purchasing reference than a cabin photograph, which may show several lighting zones at once.

Start with the view you want

Choose 6in1 for a trim-focused design

If your goal is a line of color across the dashboard and along suitable door trim, 6in1 covers that starting point. It does not include the separate footwell, handle, pocket, or speaker-surround lights listed above. Check your trim gaps before assuming the strips will fit neatly.

Kit size does not describe the finished light line; also compare visible dots and trim reflections from the seats.

Choose 10in1 to add footwell lighting

The four extra lights extend the design below the dashboard and into the footwell areas. This can suit someone who wants both an upper trim outline and light lower in the cabin. Plan mounting and wiring so nothing interferes with pedals, seat travel, or access to controls.

Choose 14in1 or 18in1 for more door details

14in1 adds door-handle lighting; 18in1 adds door-pocket lighting as well. Before paying for those pieces, look at the handle recesses and storage pockets in your own car. Your installer needs to check mounting space, panel access, and cable routing for each location.

Choose 22in1 for speaker-surround accents

The final four lights add illumination around suitable speaker areas. They do not replace or upgrade your audio speakers. Confirm that the shape and available mounting space work with your door panels before choosing this configuration.

For a fit check of the last four pieces, use the speaker-surround guide. Check each proposed trim run with the strip measurement guide; the higher piece count does not mean longer base strips.

More pieces also means more locations to plan

The retail price difference between adjacent configurations is $10 at the time of writing. The installation difference depends on the vehicle and the extra locations being fitted. Ask an installer to quote the exact configuration rather than treating every kit as the same job.

Each VASTFIRE kit includes one main control module and four sub-control modules. Their wireless communication does not eliminate the need for power and lighting wiring. All versions use DC 12V; professional installation is recommended. See our installation cost checklist for the details to include in a quote.

Check controls as well as coverage

The kit supports RGB colors, dynamic chase effects, music-sync lighting, Bluetooth app control, and a supplied physical control. Two-zone control is confirmed for 10in1 through 22in1, allowing the main trim lighting and additional lighting zones to be controlled separately. Do not assume the 6in1 version has the same two-zone capability.

Use the two-zone control guide to separate lighting groups from piece counts. If you plan to start with 6in1 and expand later, resolve expansion compatibility before relying on that route; the complete larger sets do not confirm an add-on upgrade path.

A short checklist before ordering

  1. List the specific areas you want lit, including any rear-seat areas.
  2. Match that list to the included pieces for one configuration.
  3. Have trim gaps, mounting space, and DC 12V connections checked for your vehicle.
  4. Include installation labor in your budget.
  5. Review the matching component image and the current product details before checkout.

If you are unsure which version suits your cabin, send your vehicle year, make, model, and photos of the intended mounting areas through our Contact Us page. Those details can help us discuss the kit; final installation fit still needs to be checked on the vehicle.

Back to blog

Leave a comment